PVC Wire and Cable Environmental Requirements

Factors Influencing the Carrying Capacity of Copper Cable

Causes and preventive measures for wire and cable damage in winter

In the winter, many construction workers will find that wire and cable products with good quality often have some hard lines and damaged insulation skin. Many construction workers think that it is the wire and cable product itself. There have been quality problems, and cable manufacturers have insisted that the products have been tested at the factory and are qualified products, often leading to misunderstanding between the two parties.In fact, it is not because of the quality of the product its...

Rubber Insulated Concentric Cable Manufacturer

Product name:2 core 2.5mm2 flexible control cable wireConductor type:flame retardant and oxygen-free copper material,stranded,2 coreInsulation:environmental,low smoke,halogen free,flame retardant,anti-aging properties of light pvc/xlpe materialJacket/Sheathed:pvc
 
Molding material:plasticRated-voltage:300/500vApplicable temperature:normal working temperature not exceeding...

Analysis of heat resistance of silicone rubber cables and wires

Silicone wire and cable as a new cable, which is widely used for its silicone rubber material has played a big role, let's analyze the thermal properties of silicone rubber wire and cable.
Theoretically speaking, the silicone rubber material in the air is much better heat resistance than organic rubber at different temperatures their use is not the same. In the case of 150 ℃, and its physical and mechanical properties are essentially no impact of the compensation wire can almost get permane...

The Method of Laying Medium Voltage Power Cable --- Laying in Pipe

Laying in pipe, that is a cable laying way that when there are many cables used together, to install cables into the orderly pipeline which is safely placed underground. It is required that the inner diameter of the pipe is greater than or equal to 1.5 times of the actual cable outer diameter, and to lay the cable under the permafrost layer, the slope of the pipe and in the direction of work well should be greater than 0.2%, and the gaps between each pipe should be ...