12/20kV Cu(AL)/XLPE /copper tape screen/SWA(STA)/PVC Power Cable(3 CORE)

12/20kV Cu(AL)/XLPE /copper tape screen/SWA(STA)/PVC Power Cable(3 CORE)

XLPE Cable with Copper Wire Screen

Integrated intelligent high voltage XLPE cable can online monitor the operation parameters during the operation of high voltage cable. It can online real-time monitor cable actual operation temperature and then realize online temperature measurement and control, online fault location and improve the operation load of cable system. Besides, it also can accomplish online monitoring of partial discharge, current carrying capacity and outer sheath condition. It can provide important specification judging evidence for cable safety operation and more load operation, ensure the cable safety operation, extend cable service life, develop the cable transmission capability to the deepest extent, reduce the operation cost, meet the requirement of customers’ safety and economy, and then decrease the replace frequency, reach energy saving and consumption reducing, increase utilization of transmission energy, achieve the best effect of transmission performance of XLPE cable, and have great economic benefit and social benefit.

Medium voltage cables for distribution networks; also for connection to generation units and plant and process connection. To be laid directly in ground, outdoors, indoors and in cable ducts.


Rated Voltage (Uo/U)(Um)12/20KV
Test Voltage42kV
ConductorClass 2 Stranded Copper or Aluminum Conductors for Single Core and three-Core Cables
Inner Semi-Conductive LayerSemi-conductive material
InsulationXLPE (Cross-Linked Polyethylene)
Outer Semi-Conductive LayerSemi-conductive material
Insulation ScreenSemi-conductive XLPE (Cross-Linked Polyethylene)
ScreenCopper wires or Copper tape
ArmourSingle core: AWA (Aluminium Wire Armoured)
Multi-core: SWA (Steel Wire Armoured)
SheathPVC (Polyvinyl Chloride)
Temperature RatingFixed: -20°C to +70°C
Flexed: -5°C to +70°C
Short Circuit Temperature+250°C
Minimum Bending Radius15 x overall diameter

DIN VDE 0276-620, HD 620 S1, DIN/BS EN 60228,BS EN/IEC 60332-1-2


Rated voltage: Uo/U:3.6/6kV, 6/10kV(11kV), 12/20kV(24kV), 19/33kV, 26/35kV(35kV).

No. of core: Single core or three cores.

The highest allowed operating temperature of conductor for long-term working is 90oC. In short-circuit (Max. long-term is no more than 5 seconds). The highest temperature for conductor is no more than 250ºC.

D.C. resistance of the conductor complies with the stipulations of 12/20kV(24kV).

The environment temperature should be no lower than 0oC when lay. Otherwise it should be preheated.

The cable is laid without horizontal drop limit.

Working Frequency Voltage Test: 3.5Uo/5min without puncture.

Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.

Minimum Bending Radius

Single core - Fixed: 15 x overall diameter

3 core - Fixed: 12 x overall diameter

(Single core 12 x overall diameter and 3 core 10 x overall diameter where bands are positioned adjacent to joint or terminations provided that the bending is carefully controlled by the use of a former)


(You can contact us through online message or business connection, or call our national sales hotline.)




Get the minimum offer free of charge, please fill in the following information to tell us (confidential information, not open to the public.)

Henan Jiapu cable co., ltd


No.18 Building, The National University Science Park of Henan Province, No.283 Xisanhuan Road, Zhengzhou, China.

7×24 Online


Hello, may I help you?