0.6/1 kV Cu(AL) / XLPE / SWA(STA) / PVC power cable

0.6/1 kV Cu(AL) / XLPE / SWA(STA) / PVC power cable


PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 0.6/1kV or lower.

It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication

in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.



Rated Voltage; (Uo/U)(Um)0.6/1kV
Max. working; temperature70 °c for pvc; insulation and 90 °c for xlpe insulation
Max. temperature; during short circuit (≤5S160°c (PVC; insulation), 250°c (XLPE insulation)
Conductorclass 1 and 2 copper or aluminum
Shape of conductorcircular and sectional
Shape of conductorcircular and sectional
Sectional area1.5 - 500mm2
InsulationPVC / XLPE
No. of cores1,2,3,4,5,6
Armoursteel wire or steel tape available
FillerPolypropylene lament with lapped binding tape
Core-covering:Binding tape
Min. beding radius15 times cable radius (single core), 12 times cable radius (multi cores)


XLPE cable / XLPE conductor / insulated power cable, Low voltage armored XLPE power cable Cu(AL)/XLPE/SWA(STA)/PVC power cable is included the followings:


The products are mainly complying with iec 60502 standard,also can be produced according to OEM requirements and other standards, such as bs standard, din standard, ASTM standard, etc.

0.6/1KV kv multi-cores/ copper or aluminium conductor/ XLPE insulation / copper tape or copper wire screen / galvanized steel wire armored /PVC or PE sheath / power cable, This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.

XLPE insulated power cable has a number of advantages over paper insulated and PVC insulated cable.XLPE cable has high electric strength,mechanical strength,high-ageing resisting,environmetal stress resisting antichemical corrossion,and it is simple construction,using convenient and higher operating of long term temperature.It can be laid with no drop restriction.

Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The Flame-Retardant cable covers all kinds of low-smoke low-halogen Low-Smoke Halogen Free,and non-smoke nonhalogented and three classes of A,B,C. XLPE cable having higher long-term working temperature and greater current rating,at the same environment XLPE cable may be reduced size(nominal cross-section)1or 2 class in comparison with paper and PVC cable.This is not only improve the quality and properties of products,but also reduce cables production costs.

Some of special XLPE cable can be manufactured according to the other standards required by customs.


International:IEC 60502, IEC 60228, (IEC 60332-3 for FR-type only)

China: GB/T 12706, (GB/T 18380-3 for FR-type only)

Other standards such as BS,DIN and ICEA upon request


The installation temperature should not over 20℃, If the ambient temperature is lower than 0℃, the cable should be preheated.

The bending radius of cable should not less than 8 times.

After installantion, the cable should with stand voltage test for 15min. 3.5kv D.C.


(You can contact us through online message or business connection, or call our national sales hotline.)




Get the minimum offer free of charge, please fill in the following information to tell us (confidential information, not open to the public.)

Henan Jiapu cable co., ltd


No.18 Building, The National University Science Park of Henan Province, No.283 Xisanhuan Road, Zhengzhou, China.

7×24 Online


Hello, may I help you?